EnvMeter PRO Temperature Sensor

Last update

EnvMeter Pro is a high precision temperature sensor based on a PT100 temperature sensor, and designed for meteorological use. The special morphology of the shield protects the temperature sensor from solar radiation and precipitation and uses natural ventilation for a short response time. This temperature gauge is a ready-to-install PT100 thermal sensor with mounting system. The thermal sensor PT100 has a degree of high precision (1/3DIN).

Key features

  • Speed of response to temperature variation (<5 seconds, high thermal transmittance).
  • Measurement precision above the required standards (PT100 class 1/3 DIN sensor).
  • 3/4 wires output.
  • Shielded cable.
  • Equipped with temperature sensor certificate.
  • Stainless steel mount for easy vertical pole installation.

Datasheet

NAME EnvMeter Pro
PRODUCT Temperature sensor
REFERENCE STANDARDS IEC 60751 (class 1/3 DIN)
OUTPUT (Analog) Impedance Variation (PT100 o PT1000 Δ ± 0.1°C)
Sensor dimensions Height 110mm, diameter 75mm
Cable 3 m or specify* with stainless steel sheath, high thermal resistance. UV resistant cladding
Connector 3/4 poles M8 IP67 / 4 loose pins (white – red)*
Working temperature -50 ÷ +70°C
Precision ± 0.3°C
Sensor casing Sensor: PT100 class 1/3 DIN prec. ± 0.1°C
Shielding: 6 white resin plates resistant to weather and UV
Body: white nylon brackets, steel fittings
Fastening Complete with stainless steel or white bracket with height and depth of 20cm
** when ordering, specify version (with M8 connector or loose pins) and cable length (max 15 m)

Compatibility

Producer Datalogger / Inverter model
SMA SMA inverters with MD.SEN-40
Huawei SmartLogger 1000/2000/3000 + I/O Modules of third parties
Meteocontrol BlueLog *

* when ordering, for this datalogger ask for the PT1000 version of EnvMeter

Downloads

HAVE A QUESTION?

Drop us a line for free and impartial advice from highly experienced professionals.