Last update
Pulse Output Anemometer
This cup anemometer is a wind speed sensor with pulse output for wind speeds monitoring in photovoltaic systems, ski lifts, motorways, airports etc.
The sensor is made entirely of aluminum to offer greater resistance and durability over time to atmospheric agents. It can be easily inserted on pole heads of diameters up to 36mm. Anti-icing system provided. The Pulse Output Anemometer can be ordered with a thermal heater to prevent icing, ideal for use in colder climates or in high altitude locations such as ski resorts and mountain tops.Datasheet
| NAME | Pulse Output Anemometer | |
| PRODUCT | Cup anemometer with heater | |
| REFERENCE STANDARDS | IEC 61400-12-1 | |
| Output | Pulse | |
| Measured quantities | Wind speed | 0÷50 m/s (0-180 km/h) |
| Internal temperature | No | |
| Calibration | Individual comparison with sample instrument | |
| Output | 2 pulses per revolution, equal to 1.4m/s | |
| Precision | Wind speed | ± 4.5% |
| Internal temperature | – | |
| Supply | 9 ÷ 28 Vdc protected against reverse polarity Power consumption < 10 mW without heater Power consumption < 2000 mW with heater | |
| IP code | IP65 | |
| Case | Aluminum with 3 screws fixing for direct mounting on poles up to Ø 36mm | |
| Cable | Standard: 3 m loose pins=3; Custom: up to 10 m in moderate disturbance areas | |
| Dimensions (mm) | Body: 223 h x 44 Ø ext., 36 Ø int.; Cups: 166 diameter in rotation | |
| Optional | Thermoregulator with anti-icing heater | |
Pyranometers
Anemometers
Temperature sensors