Indepths
No Indepths related to this product for the moment
Details
EnvMeter is a high precision temperature Sensor based on a PT100 temperature sensor, designed for meteorological use.
A special screen protects the temperature sensor from precipitation and uses natural ventilation for a short response time. Direct exposure to the sun should be avoided. It works from -40°C to 110°C.
The PT100 thermal sensor is ready for use. It therefore does not require any particular assembly. Install in a shady place, one meter above the ground.
Specifications
- NAME: ENVMETER
- PRODUCT: Temperature Sensor
- REFERENCE STANDARDS: IEC 60751 (class B), DIN43760 (KL. B)
- OUTPUT: Analog Impedance variation (PT100 Δ ± 0.5°C)
- Sensor casing: White PA6 (nylon) enhanced for outdoor uses
- Sensor type: Platinum thermal resistor PT100 class B placed to ensure high heat transmittance. Response rate ΔT<= 5 seconds. x ΔT ≥ 2°C
- Box: In PA6 (nylon) with cap and screws to access to 4 pins terminal blocks for cables up to 4 wires
- Sensor dimensions:
- Box: 70 x 40 x 35h mm
- Sensor tube: 70 high x 15mm diameter
- Precision: ± 0.5°C
- Working temperature: -40 ÷ +110°C
- Cable: 2m with 3 poles, shielded, with external insulation. UV and temperature resistant.
- Connector:
- 3 poles M8 IP67 / 4 loose pins (white – red)
- 3 poles M8 IP67+cable length 2m
- Compatible with Sunmeter and Sunmeter Pro (see respective datasheets)
- 4 conductors (white and red) L= 3m or specify
- Installation: For reliable readings, install the temperature sensor in a shaded position, away from sunlight and at least 1.5 meters above the ground.
Note:
- When ordering, specify cable length
- When ordering, specify version (M8 connector or loose pins)
Compatibility
Our devices are engineered with high precision and reliability, designed to seamlessly integrate with a wide range of photovoltaic systems and installations. We recommend consulting the compatibility table to ensure that your chosen sensor is fully compatible with your specific configuration.
Indephts
No Indepths related to this product for the moment
Possible combinations
This table outlines the various configurations and their corresponding applications, helping you quickly identify the best solution for your system.
Downloads
Similar products
Analog Temperature Sensor for Photovoltaics – Temmeter
IEC 60751 Class A compliant, response time < 5 seconds
Fast-response, adhesive PV temperature sensor
Blitz-wall Lightening Strike Protection for Pyranometers
IEC 61643-31 compliant, outdoor-rated surge protection
Reliable lightning protection for PV monitoring systems
TM-485 Series – Advanced Temperature Sensor Converters for Photovoltaics
Versatile temperature sensor converter series with RS-485 Modbus output for precise temperature monitoring in photovoltaic applications, offering high-precision and general-purpose models.
Analog Temperature Sensor for Photovoltaics – Temmeter Pro
IEC 60751 Class B compliant, rapid response time < 10 seconds
Temmeter PRO is a ready-to-install PT100 analog temperature sensor (temperature probe)
Temperature sensor Convertor for Photovoltaics – Temmeter 3-485
High-precision PT100/PT1000 to RS-485 Modbus converter for accurate temperature monitoring in photovoltaic and solar energy applications.
