MS-80SH_Class AMS-80SH – Class A Thermopile PyranometerMS-80SH – Class A Thermopile PyranometerMS-80SH – Class A Thermopile Pyranometer
MS-80SH_Class A

Key Features

  • Spectrally flat, fast-response thermopile detector with 285–3000 nm spectral sensitivity
  • ISO 9060:2018 Class A and IEC 61724-1:2021 Class A compliant
  • Super-fast response time of < 0.5 s for always-accurate measurements
  • Integrated high-efficiency solid-state dome heating for dew and frost resistance
  • Ultra-low power consumption: < 1.4 W total including dome heating
  • Record-low zero offset A of < 1 W/m² and < 0.5% non-stability over 5 years
  • Dual digital outputs: Modbus RS-485 RTU and SDI-12
  • S-Series internal diagnostics for temperature, tilt, roll and relative humidity
  • Level A EMI/EMC electronics surge filter and protection
  • Industry-first 5-year recommended recalibration interval
  • Wide operating temperature range: -40°C to +80°C
  • 5-year warranty for long-term peace of mind

MS-80SH – Class A Thermopile Pyranometer

ISO 9060:2018 Class A and IEC 61724-1:2021 Class A certified, delivering the highest tier of accuracy, speed and long-term reliability for solar radiation measurement.

  -  

Digital

 Output

The MS-80SH, with integrated solid-state dome heating for efficient dew and frost resistance, builds on the already industry-leading features and characteristics of the ISO 9060:2018 fast-response, spectrally flat Class A MS-80S. This combination makes the MS-80SH a standout choice for IEC 61724-1:2021 Class A monitoring. Equipped with a state-of-the-art thermopile detector and quartz diffusor technology, the MS-80SH also offers S-Series internal diagnostics, superior low zero-offset behavior, integrated surge protection, and digital Modbus RS-485 RTU and SDI-12 interfaces. Supported by a 5-year warranty and an industry-first 5-year calibration interval, it is ideally suited for applications that demand high value, accuracy,speed, and long-term reliability.

Key Features

  • Spectrally flat, fast-response thermopile detector with 285–3000 nm spectral sensitivity
  • ISO 9060:2018 Class A and IEC 61724-1:2021 Class A compliant
  • Super-fast response time of < 0.5 s for always-accurate measurements
  • Integrated high-efficiency solid-state dome heating for dew and frost resistance
  • Ultra-low power consumption: < 1.4 W total including dome heating
  • Record-low zero offset A of < 1 W/m² and < 0.5% non-stability over 5 years
  • Dual digital outputs: Modbus RS-485 RTU and SDI-12
  • S-Series internal diagnostics for temperature, tilt, roll and relative humidity
  • Level A EMI/EMC electronics surge filter and protection
  • Industry-first 5-year recommended recalibration interval
  • Wide operating temperature range: -40°C to +80°C
  • 5-year warranty for long-term peace of mind
find out more

Indepths

No Indepths related to this product for the moment

Details

Based on our experience in calibrations and comparative calibrations, we remain convinced that a good photovoltaic pyranometer is the most accurate instrument for determining the PR of a photovoltaic system.

Nevertheless, in many cases, a thermopile pyranometer is required for contractual reasons or for reference with historical weather data series. Therefore, based on our experience, we recommend the Class A pyranometer from EKO Instruments, the brand we believe to be the best in the world.
The MS-80SH is a state-of-the-art Class A pyranometer that combines a spectrally flat, fast-response thermopile detector with integrated solid-state dome heating for efficient dew and frost mitigation. Building on the industry-leading MS-80S, it adds S-Series internal diagnostics, superior low zero-offset behaviour, integrated surge protection, and dual digital interfaces (Modbus RS-485 RTU and SDI-12). Backed by a 5-year warranty and an industry-first 5-year recalibration interval, the MS-80SH is ideally suited to applications that demand high value, accuracy, speed, and long-term reliability  from utility-scale PV monitoring to scientific research.

Specifications

Advanced Thermopile Sensor Technology

At the heart of the MS-80SH is a state-of-the-art thermopile detector with quartz diffusor technology, providing a flat spectral response across 285 to 3000 nm. This broad, spectrally flat coverage captures both visible and near-infrared irradiance with exceptional precision, achieving Class A performance under both the ISO 9060:2018 and IEC 61724-1:2021 standards.

Super-Fast Response

With a 95% response time of less than 0.5 seconds, the MS-80SH captures rapid changes in irradiance in near real time. This makes it ideal for dynamic conditions and high-resolution performance monitoring where slower sensors would miss transient events.

Integrated Solid-State Dome Heating

High-efficiency integrated solid-state dome heating mitigates dew and frost build-up on the dome, ensuring reliable data availability in challenging conditions — all while keeping total power consumption below 1.4 W. Dome heating can be toggled on or off via the Hibi software or through Modbus / SDI-12 commands, giving users complete control over the function.

Smart Digital Electronics

A smart signal transducer provides two different digital outputs — Modbus RS-485 RTU and SDI-12 — for seamless integration with data loggers and SCADA systems. This digital architecture ensures consistent, low-noise performance and simplifies long-distance signal transmission and network deployment.

S-Series Internal Diagnostics

The MS-80SH includes a full suite of internal diagnostic sensors, standard across the S-Series:

  • Tilt angle sensor – measures the pyranometer's angle of inclination and monitors East-West alignment and installation angle
  • Humidity sensor – measures internal humidity and monitors desiccant degradation
  • Temperature sensor – measures internal temperature and corrects the irradiance data

Together these diagnostics provide visibility over sensor health and installation quality, helping ensure optimum performance without the need for regular physical site checks , ideal for complex networks and hard-to-reach locations.

Robust Protection & Surge Immunity

The MS-80SH features a Level A EMI/EMC electronics surge filter and integrated surge protection, tested to IEC 61326-1 (Industrial Electromagnetic Environment) and IEC 61000-4-5 (Level 2, Test Criterion B). With IP 67 ingress protection, it is built for long-term outdoor deployment in demanding environments.

Precision Calibration & Quality Assurance

Each MS-80SH is calibrated to ISO 17025 standards, traceable to the World Radiometric Reference (WRR), with a calibration uncertainty of < 0.7% (k = 1.96). EKO's industry-first 5-year recommended recalibration interval — combined with < 0.5% non-stability over 5 years — significantly reduces the total cost of ownership and site maintenance.

Software – Hibi

With 'Hibi', a custom-built programme developed by EKO, users can connect the pyranometer to a standard laptop for real-time access to internal diagnostics, custom settings and irradiance data — making the MS-80SH easy to use, deploy and maintain.


Classification & Standards
  • Classification: ISO 9060:2018 Class A / IEC 61724-1:2021 Class A
  • Response time (95%): < 0.5 s
  • Zero offset A (thermal radiation, 200 W/m²): ± 1 W/m²
  • Zero offset B (temperature change, 5 K/hr): ± 1 W/m²
  • Zero offset C (total): ± 2 W/m²
  • Non-stability: < 0.5% / 5 years
  • Non-linearity (100 to 1000 W/m²): ± 0.2%
  • Directional response (0 to 80° at 1000 W/m²): ± 10 W/m²
  • Spectral error: ± 0.2%
  • Temperature response (-20°C to 50°C): ± 0.5%
  • Tilt response (0–90° at 1000 W/m²): ± 0.2%
  • Additional signal processing error: < 1 W/m²
Technical Features
  • Wavelength range: 285 to 3000 nm
  • Maximum operational irradiance: 4000 W/m²
  • Digital output irradiance range: -200 to 2000 W/m²
  • Signal output: Modbus RS-485 RTU / SDI-12
  • Sensor diagnostics: Relative humidity ± 2%, Temperature ± 0.1%, Tilt angle ± 1°
  • Dome heating control: Toggle on/off via Hibi software or commands via Modbus / SDI-12
  • Operating temperature: -40°C to +80°C
  • Supply voltage: 8 to 30 VDC
  • EMC / surge protection: IEC 61326-1 (Industrial) / IEC 61000-4-5 (Level 2, Criterion B)
  • Power consumption: < 1.5 W
  • Ingress protection: IP 67
  • Calibration traceability / uncertainty: ISO 17025 / WRR / < 0.7% (k = 1.96)
  • Standard cable length: 10 m (optional 20 m, 30 m, 50 m)
  • Warranty: 5 years
  • Recommended recalibration interval: 5 years

Indephts

No Indepths related to this product for the moment

Possible combinations

This table outlines the various configurations and their corresponding applications, helping you quickly identify the best solution for your system.

ℹ

Compatible Sensor Combinations

How it works: Pair this sensor with the devices listed below to create powerful measurement systems. Each combination provides specific output types and calculated values to meet your monitoring needs.

Associated Sensors
Output
Calculated Values
No combinations found

Similar products

PYR1-420 – Class B Thermopile Pyranometer
PYR1-485 – Class B Thermopile Pyranometer

ISO 9060:2018 Class B certified, ensuring adherence to international standards for high-precision solar radiation measurement instruments.

Class_B grade Thermopile Pyranometer with RS485 Modbus output and integrated inclinometer for high-precision solar radiation measurement in meteorological and photovoltaic applications.

PYR1-420 – Class B Thermopile Pyranometer
PYR1-420 – Class B Thermopile Pyranometer

ISO 9060:2018 Class B certified, ensuring adherence to international standards for solar radiation measurement instruments.

Class B grade Thermopile Pyranometer for high-precision solar radiation measurement in meteorological and photovoltaic applications.