EnvMeter PRO Temperature Sensor
Last update
EnvMeter PRO Temperature Sensor
EnvMeter Pro is a high precision temperature sensor based on a PT100 temperature sensor, and designed for meteorological use.
The special morphology of the shield protects the temperature sensor from solar radiation and precipitation and uses natural ventilation for a short response time.
This temperature gauge is a ready-to-install PT100 thermal sensor with mounting system.
The thermal sensor PT100 has a degree of high precision (1/3DIN).
Key features
- Speed of response to temperature variation (<5 seconds, high thermal transmittance).
- Measurement precision above the required standards (PT100 class 1/3 DIN sensor).
- 3/4 wires output.
- Shielded cable.
- Equipped with temperature sensor certificate.
- Stainless steel mount for easy vertical pole installation.
Datasheet
| NAME | EnvMeter Pro | |
| PRODUCT | Temperature sensor | |
| REFERENCE STANDARDS | IEC 60751 (class 1/3 DIN) | |
| OUTPUT | (Analog) Impedance Variation (PT100 o PT1000 Δ ± 0.1°C) | |
| Sensor dimensions | Height 110mm, diameter 75mm | |
| Cable | 3 m or specify* with stainless steel sheath, high thermal resistance. UV resistant cladding | |
| Connector | 3/4 poles M8 IP67 / 4 loose pins (white – red)* | |
| Working temperature | -50 ÷ +70°C | |
| Precision | ± 0.3°C | |
| Sensor casing | Sensor: PT100 class 1/3 DIN prec. ± 0.1°C
Shielding: 6 white resin plates resistant to weather and UV Body: white nylon brackets, steel fittings |
|
| Fastening | Complete with stainless steel or white bracket with height and depth of 20cm | |
** when ordering, specify version (with M8 connector or loose pins) and cable length (max 15 m)
Compatibility
| Producer | Datalogger / Inverter model | |
|---|---|---|
| SMA | SMA inverters with MD.SEN-40 | |
| Huawei | SmartLogger 1000/2000/3000 + I/O Modules of third parties | |
| Meteocontrol | BlueLog * | |
* when ordering, for this datalogger ask for the PT1000 version of EnvMeter
Pyranometers
Anemometers
Temperature sensors