EnvMeter Temperature Sensor
Last update
EnvMeter Temperature Sensor
EnvMeter is a high precision temperature Sensor based on a PT100 temperature sensor, designed for meteorological use.
A special screen protects the temperature sensor from precipitation and uses natural ventilation for a short response time. Direct exposure to the sun should be avoided. It works from -40°C to 110°C.
The PT100 thermal sensor is ready for use. It therefore does not require any particular assembly. Install in a shady place, one meter above the ground.
Key features
- Fast speed of response to temperature variation (<5 seconds, high thermal transmittance).
- Measurement precision above the required standards (PT100 class 1/3 DIN sensor).
- 3/4 wires output.
- Shielded cable.
- Equipped with temperature sensor certificate.
- Easy installation.
Datasheet
| NAME | ENVMETER | |
| PRODUCT | Temperature Sensor | |
| REFERENCE STANDARDS | IEC 60751 (class B), DIN43760 (KL. B) | |
| OUTPUT | Analog Impedance variation(PT100 Δ ± 0.5°C) | |
| Sensor casing | White PA6 (nylon) enhanced for outdoor uses | |
| Sensor type | Platinum thermal resistor PT100 class B placed to ensure high heat transmittance. | |
| Response rate ΔT | <= 5 seconds. x ΔT ≥ 2°C | |
| Box | In PA6 (nylon) with cap and screws to access to 4 pins terminal blocks for cables up to 4 wires | |
| Sensor dimensions | Box: 70 x 40 x 35h mm
Sensor tube: 70 high x 15mm diameter |
|
| Precision | ± 0.5°C | |
| Working temperature | -40 ÷ +110°C | |
| Cable | 2m with 3 poles, shielded, with external insulation. UV and temperature resistant. * | |
| Connector | 3 poles M8 IP67 / 4 loose pins (white – red)** | |
 |
3 poles M8 IP67+cable length 2m
Compatible with Sunmeter and Sunmeter Pro (see respective datasheets) |
|
 |
4 conductors (white and red) L= 3m or specify |
|
| Installation | For reliable readings, install the temperature sensor in a shaded position, away from sunlight and at least 1.5 meters above the ground. | |
* when ordering, specify cable length
** when ordering, specify version (M8 connector or loose pins)
Compatibility
| Producer | Datalogger / Inverter model | |
|---|---|---|
| SMA | SMA inverters with MD.SEN-40/td> | |
| Huawei | SmartLogger 1000/2000/3000 + I/O Modules of third parties | |
| Meteocontrol | BlueLog * | |
* when ordering, for this datalogger ask for the PT1000 version of EnvMeter
Pyranometers
Anemometers
Temperature sensors