Details
The PV Meter is a digital reference PV module sensor that uses an actual PV module – the same type installed in your solar plant – to measure both power output and solar irradiance (W/m²). By using a real module as a PV module sensor, it provides highly accurate data that reflects the true behaviour of your PV array in terms of linearity, spectral response and temperature performance.
Each PV Meter is individually calibrated against a silicon reference cell certified by the ISFH Institute (Dakks-accredited), ensuring a measurement uncertainty of less than ±2%. It supports digital communication via RS485 and Modbus RTU protocol, enabling easy integration into professional solar monitoring systems.
Thanks to its precision and robustness, this PV module sensor is widely used to perform high-accuracy PR calculations and radiation assessments in utility-scale and commercial PV plants. Built to withstand outdoor environments, it includes UV-resistant cabling, IP65 protection and a wide operating temperature range.
Specifications
- Sensor Type: PV Power Sensor (Real PV Module)
- Output Type: Digital (RS485, Modbus RTU Protocol)
- Input Range: Irradiance: 0 to 1500 W/m²
- Spectral Range: Same as your PV module (0.3 to 1.1 µm)
- Measurement Uncertainty: ≤ ±2% @ 1000 W/m²
- Reference Cell Uncertainty: ±1.2% (ISFH, Dakks-accredited)
- Temperature Sensor: External PT100 (Temp accuracy ≤ ±0.5°C)
- Operating Temperature: -30°C to +90°C
- Temperature Drift: < ±0.2% at 1000 W/m²
- Electronics Non-Linearity: ±0.03% of range
- Power Supply: 18–80 VDC (protected against reverse polarity & short circuit)
- Connectors: Male M12 8-pin IP67 (main), Female M12 8-pin IP67 (PV input)
- Cable: 50 cm UV-resistant with male connector
- Dimensions: 119.5 x 94 x 34 mm
- Weight: 0.285 kg
- Protection Rating: IP65
- Compliance Standards: IEC 60904-2, -4, -10, IEC 61724-1.
Possible combinations
This table outlines the various configurations and their corresponding applications, helping you quickly identify the best solution for your system.
Downloads
Similar products
Sunmeter Pro bifacial irradiance sensor-Albedometer
Compliant with IEC 61724-1 and IEC 60904-2 standards, with TZOS® technology for superior measurement accuracy- Output: RS485-MODBUS
High-Precision Bifacial Photovoltaic Pyranometer for Accurate Bifacial PV Plant Performance Measurement
Blitz-wall Lightening Strike Protection for Pyranometers
IEC 61643-31 compliant, outdoor-rated surge protection
Reliable lightning protection for PV monitoring systems
Sunmeter 2 – 485 Pro Wind LED – Advanced Solar Measurement Solution
IEC 60904-2 certified, ensuring the highest standards in photovoltaic device measurement and calibration (with combination of Anemometer & Temmeter sensors which are sold separately).
3-in-1 sensor for solar irradiance, temperature, and wind speed via RS485 Modbus.
Litemeter Current PAR
Litemeter Current PAR is a silicon pyranometer with a filter for Photosynthetically Active Radiation (PAR) – the wavelength of light plants used in photosynthesis. It can be used outdoors, in greenhouses, in water or in growth chambers. Ideal for use in floriculture, agriculture and biology.
PYR1-485 – Class B Thermopile Pyranometer
ISO 9060:2018 Class B certified, ensuring adherence to international standards for high-precision solar radiation measurement instruments.
Class_B grade Thermopile Pyranometer with RS485 Modbus output and integrated inclinometer for high-precision solar radiation measurement in meteorological and photovoltaic applications.

